Session: 1
Session: 2
Session: 3
Session: 4
Session: 5
Session: 6
Session: 7
Session: 8
Session: 9
Session: 10
Orthodontic Fellowship
Login
Register
Orthodontic Fellowship
Login
Register
Session 1: Module 1 - Accurate Diagnosis for Orthodontic Treatment (6 hrs)
Learning Objectives:
1. To use the Model analysis to determine, Arch Form, Arch Width and Arch Depth.
2. Define and measure width of an Arch form and Arch Depth.
3. Identify the ideal Arch width and develop a treatment plan for patients with a compromised Arch form.
4. Define the importance of completing a cephalometric analysis during the diagnostic stage of Orthodontic treatment
5. Describe basic Orthodontic cephalometric classifications and definitions
6. Identify basic cephalometric points, landmarks, and measurements.
7. To define which records are required for each type of Orthodontic case.
8. To take intra-oral and extra-oral Orthodontic photographs and place them in the appropriate diagnostic template.
9. To perform an initial Orthodontic visit and what information is required from patients during this first consultation.
Module: 1 (2.5 hrs)
Model Analysis is the first and foremost Adjunct to Cephalometrics.
- Richard Beistle
Module: 2 (3 hrs)
Orthofellowship: Introduction to Diagnosis: Cephalometric Analysis-Module 1, Course 2
- Viet Nghiem
Module: 3 (1.5 hrs)
Orthofellowship: Orthodontic Records and Photography-Module 1, Course 3
- Barry Winnick
Session 2: Module 2 - Beginning Clear Aligner Treatment (12 hrs)
Learning Objectives:
1. To determine which type of malocclusions are best treated with clear Aligner
2. Identify Andrews 6 keys to occlusion
3. To select the appropriate initial clear Aligner cases to treat.
4. Set-up clinical preferences related to clear Aligner treatment.
5. Recognize the direction of force that clear Aligner attachments exert on each tooth.
6. Perform Inter Proximal Reduction (IPR) when needed in clear Aligner cases.
7. Use the final clear Aligner as a Finishing Appliance.
8. Differentiate Class II malocclusions.
9. Identify the most appropriate Class II treatment option to select
10. Recognize complex tooth movements and degree of difficulty of each case.
11. Complete the USDI Case Evaluation Form.
12. Identify tooth movements that cause open bites.
13. Perform IPR efficiently and in the appropriate instances.
14. Recognize the importance of using attachments with clear Aligner treatment and how force is generated on each tooth.
15. Identify arch length discrepancies and prepare a treatment plan to resolve these issues.
16. Recognize the many benefits of using a utility arch appliance during treatment
17. Identify which cases to treat when starting to incorporate Orthodontics into the practice.
18. Identify the 5 steps needed to successfully submit an aligner case.
19. Recognize the importance of good records and a comprehensive cephalometric analysis
20. Complete a clear aligner prescription form efficiently
Module: 1 (3 hrs)
Orthofellowship: Clear Aligner Treatment Cases Part 1-Module 2, Course 1
- Barry Winnick
Module: 2 (3.25 hrs)
Orthofellowship: Clear Aligner Treatment for Orthodontic Cases Part 2-Module 2, Course 2
- Barry Winnick
Module: 3 (1.25 hrs)
Orthofellowship: Transverse/Horizontal Correction-Module 2, Course 3
- Barry Winnick
Module: 4 (2 hrs)
Orthofellowship: AP Correction with Clear Aligners-Module 2, Course 4
- Barry Winnick
Module: 5 (1.25 hrs)
Orthofellowship: Deep Bite Correction with Clear Aligners-Module 2, Course 5
- Barry Winnick
Module: 6 (1.25 hrs)
Orthofellowship: Arch Length Correction with Clear Aligners-Module 2, Course 6
- Barry Winnick
Module: 7 (1 hr)
Orthofellowship: Submitting Clear Aligner Cases Efficiently-Module 2, Course 7
- Barry Winnick
Session 3: Module 3 - Beginning Straight Wire Treatment (3 hrs)
Learning Objectives:
1. Recognize the importance of vertical control during Orthodontic treatment.
2. Select the appropriate cases to treat related to vertical dimension challenges.
3. Identify how growth and development can impact the accurate diagnosis of Orthodontic cases.
4. Recognize Angle’s molar classification.
5. Describe the various Class II malocclusions.
6. Evaluate the Pont’s analysis
7. Bond Orthodontic brackets and bands effectively.
8. Identify the appropriate Orthodontic adhesive to use for both enamel and porcelain
9. Identify the reason for bracket bond failure and implement a solution.
10. Place spacers, size and cement molar bands.
11. Recognize the importance of appropriate bracket placement related to patient’s muscle strength and malocclusion.
12. Select the appropriate cases to treat related to vertical dimension challenges.
13. Identify the applicable sequence of treatment and wire progression for each Orthodontic case treated.
Module: 1 (1 hr)
Orthofellowship: How Muscle Strength Impacts Orthodontic Treatment-Module 3, Course 1
- Jim Prittinen
Module: 2 (0.75 hrs)
Orthofellowship: Treatment Planning for Beginning Straight Wire Cases-Module 3, Course 2
- Jim Prittinen
Module: 3 (1.2 hrs)
Orthofellowship: Efficient Bracket Bonding Technique & Troubleshooting-Module 3, Course 3
- Jim Prittinen
Module: 4 (1.5 hrs)
Orthofellowship: Leveling and Initial Aligning in Straight Wire Cases-Module 3, Course 4
- Jim Prittinen
Session 4: Module 4 - Correcting Class II Malocclusions with Clear Aligner Treatment (2 hrs)
Learning Objectives:
1. Describe the benefits of up-righting and de-rotating molars when treating a Class II malocclusion case.
2. Identify multiple clinical options to select from, when presented with a Class II malocclusion case.
3. Explain the benefits of correcting the AP prior to starting clear Aligner treatment in Class II patients.
Module: 1 (2 hrs)
Orthofellowship: Correcting Class II Malocclusions with Clear Aligner Treatment-Module 4, Unit 1
- Barry Winnick
Session 5: Module 5 - Clear Aligner Treatment in Mixed Dentition Cases (1 hr)
Learning Objectives:
1. Describe the benefits of using clear Aligners during early (mixed dentition) Orthodontic treatment.
2. To select the appropriate mixed dentition Orthodontic cases to treat.
3. Develop strategies for effective treatment planning with clear Aligners for early Orthodontic treatment.
Module: 1 (1.5 hrs)
Orthofellowship: Clear Aligner Treatment in Mixed Dentition Cases-Module 5, Course 1
- Barry Winnick
Session 6: Module 6 - Intermediate Straight Wire Treatment (1 hr)
Learning Objectives:
1. Distinguish between a dental and skeletal open bite.
2. Select the appropriate treatment option depending on the type of open bite case presented
3. Use reverse curve wires and heavy elastics effectively when treating open bite cases.
4. Differentiate between a mild, moderate, and severe deep bite Orthodontic case.
5. Identify when to intrude anterior teeth or extrude posterior teeth when treating a deep bite Orthodontic case.
6. Bend stainless steel reverse curve wires and anticipate the clinical impact that these wires will produce.
Module: 1 (1 hr)
Orthofellowship: Straight Wire Mechanics-Special Emphasis on Deep Bite Cases-Module 6, Course 1
- Jim Prittinen
Module: 2 (0.75 hrs)
Orthofellowship: Straight Wire Mechanics-Special Emphasis on Open Bite Cases-Module 6, Course 2
- Jim Prittinen
Session 7: Module 7 - Finishing and Retention of Orthodontic Case (1 hr)
Learning Objectives:
1. Identify which retainer to use for each type of malocclusion.
2. Set-up a pre finishing checklist to review with patients before the debonding process
3. Resolve minor midline and open bite correction during the finishing process.
Module: 1 (1.25 hrs)
Orthofellowship: Finishing and Retention of Orthodontic Cases-Module 7, Course 1
- Jim Prittinen
Session 8: Module 8 - Clear Aligner Case Review (1 hr)
Learning Objectives:
1. Identify why dark triangles occur and how to resolve this issue.
2. Define appropriate intervals for non-growing patients to change their Aligners.
3. Identify appropriate compromised treatment in adult (non-growing) patients.
4. Identify how natural growth impacts Orthodontic treatment.
5. Define non-growing versus growing patients.
6. Identify how deep bite cases can be treated with Aligners in growing patients.
Module: 1 (1 hr)
Orthofellowship: Clear Aligner Case Review--Non-Growing Patients-Module 8, Course 1
- Barry Winnick
Module: 2 (0.5 hrs)
Orthofellowship: Clear Aligner Case Review--Growing Patients-Module 8, Course 2
- Barry Winnick
Session 9: Module 9 - Fixed Orthodontics - Case Review (0 hrs)
Learning Objectives:
1. Identify the importance of accurate bracket placement.
2. Define the appropriate wire progression for beginning Orthodontic cases.
3. Describe the steps required during the repositioning appointment
Module: 1 (0.25 hrs)
Orthofellowship: Straight Wire Case Review-Module 9, Course 1
- Jim Prittinen
Session 10: Module 10 - Marketing and Incorporating Clear Aligners Into Your Practice (1 hr)
Learning Objectives:
1. Identify a step-by-step approach to integrate clear Aligner treatment into the practice.
2. Develop an internal and external clear Aligner marketing plan.
3. Identify strategies to excite and train team members on how to successfully add clear Aligner treatment into the practice.
Module: 1 (1.2 hrs)
Orthofellowship: Clear Aligners: Effective Integration and Marketing-Module 10, Course 1
- Marie Gerson
Orthodontic Fellowship
$3500